Cable sealing device installation consideration
1. Purchasing appropriate joint materials according to the required
cable joint model specifications. Now the material quality of the cable sealing device is uneven, but in order to ensure the quality of the cable connection, is it recommended to use uninvited guests, the best choice is reliable quality Material of the cable connector manufacturer.
2. When the cable joint is best not to choose a rainy day, because the cable water will seriously affect the life of the
cable and even short-circuit accidents.
3. Be sure to read the manufacturer's instructions carefully before making this product waterproof cable connector, for 10kV and above this cable, it is particularly important to perform all the steps before you want to perform it well.
4. 10kV or more single-core armored
cable is finally connected, remember that only one end of the main street is grounded.
5. When the pressed brass cannot be too difficult, as long as you can press the arrangement, there must be a lot of points raised on the surface of the copper crimping end. This back-set rasp flat must be used, we cannot Leave any glitches.
6. Heat-shrinkable
cable connection, when using a small flame device, pay attention to the small flame device to move repeatedly, not only often facing one direction, the small flame device.
7. The cable connection must strictly abide by the instructions to execute the scope contraction of the drawing.
