Advantages of
nut
The nut, also known as the nut, is a self-tightening nut. It is used on a thin plate or a kind of nut on a thin plate. Its shape is round, with convex teeth and guide grooves at one end. The buried depth of the anchor bolts and the hooks are to ensure the friction between the bolts and the foundation, so that the bolts will not be pulled out and damaged. The anchor bolts have the function of fixing equipment without strong vibration and impact. The principle is to press the embossing teeth into the preset hole position of the sheet material. Generally, the hole diameter of the preset hole is slightly smaller than that of the
nut, and the spline teeth of the rivet are squeezed into the plate by pressure, so that the perimeter of the hole is generated. Plastic deformation. The deformer is squeezed into the guide groove to produce a locking effect.
Pressure riveting
nuts are divided into S type quick-cut steel pressure riveting nuts, CLS type stainless steel pressure riveting
nuts, SP type stainless steel pressure riveting nuts and CLA type copper-aluminum pressure riveting nuts. They should be used in different environments. Fasteners are also called standard parts in the market, which are mechanical components that can mechanically fix or bond two or more components together. It is characterized by a wide variety of specifications, different performance and uses, and a high degree of standardization, serialization, and generalization. Fasteners are the most widely used mechanical basic parts and are in great demand. Specifications usually range from M2 to M12. There is no unified national standard for nuts, and they are often used in chassis cabinets and sheet metal industries.
S series, CLS series, and SP series
nuts provide a simple method for installing internal threads to clean sheet metal products, and play a reliable fixed role. There are generally two kinds of
nuts, one is iron, that is, carbon steel. One is stainless steel, and of course there are copper and aluminum nuts, but these are less used. Copper is still somewhat useful, and nuts like aluminum are rarely used. There are two grades of hex nut, one is 4.8 grade, ordinary nut, and the other is grade 8. For more industry knowledge about nuts, please read the nut specification table and the national standard specification table of the nut industry. These
nut specification sheets and industry standard knowledge. Let us have a deeper understanding of nuts. The small and delicate nut makes the flat processing of one side of the board perfect. When installing, only need to insert the nut into the hole of the metal plate and press to complete the inlay solid function.
Application advantage
1. Keep the back of the board completely flat,
2. Small and exquisite, suitable for all electronic or precision equipment,
3. High torsion resistance;
4. Convenient equipment, just simple pressure riveting;
5. Serialization of specifications can meet a variety of design requirements.
